You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Wet Ground Mica

Why do my pressed eyeshadows show streaks or a directional sheen?

Because the platelets align during pressing, and the alignment is not uniform.

Platy materials orient parallel to the pressing surface, which is what produces the sheen — but if the fill is uneven or the press is not level, the platelets align at slightly different angles across the pan, and the result reads as streaks. It is a process problem, not a material problem, in most cases.

Two things help: a tighter particle size distribution (synthetic grades are better here) and a slower press cycle with a more even fill. Adding a small amount of a spherical filler also breaks up the alignment and reduces the effect.

Regulatory status — Mica INCI MICA · CAS 12001-26-2
MarketStatusBasis and conditions
EU Permitted CosIng listed; no Annex restriction — Heavy-metal content (Pb, As, Hg) is controlled through the general safety requirement and the supplier specification, not through an Annex limit.
UK Permitted CosIng listed; no Annex restriction
US Permitted No ingredient-level restriction
China Permitted IECIC
Japan Permitted General cosmetic ingredient
ASEAN Permitted ACD, no Annex entry
Korea Permitted MFDS cosmetic ingredient standard
Canada Permitted Hotlist: not listed

Swipe the table sideways for the full basis column →

Watch: None at ingredient level. Sericite is a fine-grained muscovite and follows the same status.

Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor