Can mica be used in liquid foundations and cushions?
Yes, and it is common in both, but the behaviour is different from a powder.
In a fluid the platelets settle and orient horizontally during storage, so the product can develop a soft sediment and, on shaking, a visible swirl. That is cosmetic rather than fatal, but it is why a suspension aid — a rheology modifier or a small amount of thixotropic clay — is usually needed in a mica-containing emulsion.
Loading is lower than in a powder: 3–10% is typical, enough for slip and a soft-focus effect without grit or hard settling. Wet-ground grades with a tight distribution are the safer choice, because a coarse tail is what you feel in a thin film.
Test the finished emulsion for settling over four weeks at 40 °C before scaling up.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Heavy-metal content (Pb, As, Hg) is controlled through the general safety requirement and the supplier specification, not through an Annex limit. |
| UK | Permitted | CosIng listed; no Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None at ingredient level. Sericite is a fine-grained muscovite and follows the same status.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.