You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Ordering & Samples

How close are domestic fumed silica suppliers to Evonik and Cabot?

For standard fumed silica the gap has largely closed. What remains sits in high purity, specialized surface treatment, and batch consistency.

Where domestic product matches: specific surface area of 150-400 m²/g, pH, loss on drying and loss on ignition are achievable at the same level by mainstream Chinese producers, typically 20-40% cheaper. In coatings, adhesives, and cosmetic thickening or anti-settling applications, most formulas can switch directly.

Where it still trails: purity, meaning trace iron and copper content, where imported grades hold tighter batch-to-batch consistency and which matters for premium cosmetics and electronics. Surface treatment, where hydrophobic grades treated with dimethyldichlorosilane still lag on treatment uniformity and residual hydroxyl control, showing up as different dispersion difficulty and thixotropy in the formula. And batch variation, where an imported product may hold specific surface area within plus or minus 5% across ten lots while domestic ranges are wider and warrant incoming inspection on every lot.

Practical guidance: grade by application. For functional roles such as thickening and anti-settling, substitution risk is low. For optical and sensory roles, always prototype first. For pharmaceutical or premium skincare, keep the import or run dual sourcing. And do not switch in one step — blend at 30% for two months and watch stability before committing.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor