Natural mica or synthetic fluorphlogopite?
Natural for cost and for a slightly more 'real' lustre; synthetic for purity, whiteness and a cleaner regulatory story.
Wet-ground natural mica carries the natural trace elements of the mineral, which is why it needs a heavy-metal statement and, in some markets, additional documentation. Synthetic fluorphlogopite is produced from a controlled melt, so it is brighter and whiter, has a tighter particle size distribution, and its documentation is simpler. It costs more.
In a high-end eyeshadow or a product going into a strict market, synthetic is usually worth the extra cost. In a mass-market pressed powder, natural mica does the job.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Heavy-metal content (Pb, As, Hg) is controlled through the general safety requirement and the supplier specification, not through an Annex limit. |
| UK | Permitted | CosIng listed; no Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None at ingredient level. Sericite is a fine-grained muscovite and follows the same status.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.