My pressed powder looks weak in colour. Is it the pigment or the base?
Usually the base — and you can tell in one test, by pressing the same pigment load in a base with and without the opacifying filler.
Three base effects flatten colour in a compact. A high whitening filler, typically TiO2 or a bright kaolin, lifts the shade and reduces apparent saturation. A high binder level wets the pigment and makes it read darker and duller than it does in a drawdown. And over-compression reduces the pay-off, so less pigment transfers to skin per stroke and the pan looks weak even though the loading is correct.
If the same load reads properly in a drawdown but weakly on skin, the problem is transfer rather than colour: too much binder, too hard a press, or not enough of a gliding filler to let the powder release.
The check that settles it: press two pans, one with 10% of the colour removed and one as-is, and compare them on skin. If they look the same, the pigment is not what is limiting you.