Your grades run from 5 to 16 µm with oil absorption from 40 to 81. How do I choose?
Choose by oil absorption first, particle size second — the two move together but not perfectly, and oil absorption is what drives the skin feel.
LS-325 at 16 µm and oil absorption 40 is the slip grade: the most glide, the least oil uptake, the natural choice in loose powder and body powder where smoothness is the whole point. LS-800 at 12 µm and 63 and LS-1250 at 8 µm and 62 are the middle band most pressed powders are built around. LS-2500 and LS-6005 at 5 µm and 81 are the oil-control grades — highest surface area at 8, most mattifying, and the driest to the touch.
If you are choosing blind, start at 12 µm. It is the grade that offends nobody.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Restricted | Annex III / entry 59 — Powdery products for children under 3 must carry "Keep powder away from children's nose and mouth". Asbestos must be absent (Annex II). |
| UK | Restricted | Schedule 3 / entry 59 (retained EU law) — Same wording as the EU entry. |
| US | Permitted | No ingredient-level restriction (FD&C Act) — No federal limit. FDA proposed an asbestos-testing rule in Dec 2024 and withdrew it on 28 Nov 2025; there is no mandatory federal test standard. |
| China | Permitted | IECIC (Inventory of Existing Cosmetic Ingredients) — Asbestos is on the prohibited list; cosmetic-grade talc must be asbestos-free by specification. |
| Japan | Permitted | Not a quasi-drug ingredient; general cosmetic use — No concentration limit for cosmetic use. |
| ASEAN | Permitted | ASEAN Cosmetic Directive, no Annex entry — Asbestos prohibited under ACD Annex II. |
| Korea | Permitted | MFDS cosmetic ingredient standard — No ingredient-level restriction for cosmetic use. |
| Canada | Permitted | Cosmetic Ingredient Hotlist: not listed — Hotlist does not restrict talc. |
Swipe the table sideways for the full basis column →
Watch: ECHA RAC recommends Carc. 1B plus STOT RE 1; Article 15 would then ban talc in cosmetics automatically unless the pending derogation succeeds. Expected to be settled in 2027, not yet in force. The UK HSE technical report (Jan 2026) does not propose a CMR classification, so GB requirements are expected to stay as they are.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.