LS-2500 and LS-6008 are both listed at 8 µm but with different oil absorption. Which number do I trust?
The oil absorption figure — the size is a nominal mean, and the two grades are produced on different lines.
LS-2500 reports 8 µm with surface area 8 and oil absorption 81; LS-6008 reports 8 µm with surface area 6 and oil absorption 66. Same nominal size, different surface character, and the surface is what the formula responds to. A 15-point gap in oil absorption in a pressed powder is the difference between a mattifying compact and a normal one.
That is why we publish all three numbers rather than only the particle size. Choose on the oil absorption and use the size to sanity-check the feel.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Restricted | Annex III / entry 59 — Powdery products for children under 3 must carry "Keep powder away from children's nose and mouth". Asbestos must be absent (Annex II). |
| UK | Restricted | Schedule 3 / entry 59 (retained EU law) — Same wording as the EU entry. |
| US | Permitted | No ingredient-level restriction (FD&C Act) — No federal limit. FDA proposed an asbestos-testing rule in Dec 2024 and withdrew it on 28 Nov 2025; there is no mandatory federal test standard. |
| China | Permitted | IECIC (Inventory of Existing Cosmetic Ingredients) — Asbestos is on the prohibited list; cosmetic-grade talc must be asbestos-free by specification. |
| Japan | Permitted | Not a quasi-drug ingredient; general cosmetic use — No concentration limit for cosmetic use. |
| ASEAN | Permitted | ASEAN Cosmetic Directive, no Annex entry — Asbestos prohibited under ACD Annex II. |
| Korea | Permitted | MFDS cosmetic ingredient standard — No ingredient-level restriction for cosmetic use. |
| Canada | Permitted | Cosmetic Ingredient Hotlist: not listed — Hotlist does not restrict talc. |
Swipe the table sideways for the full basis column →
Watch: ECHA RAC recommends Carc. 1B plus STOT RE 1; Article 15 would then ban talc in cosmetics automatically unless the pending derogation succeeds. Expected to be settled in 2027, not yet in force. The UK HSE technical report (Jan 2026) does not propose a CMR classification, so GB requirements are expected to stay as they are.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.