You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Talc FAQ

13 answered questions on Talc.

Talc13 answers
001Your grades run from 5 to 16 µm with oil absorption from 40 to 81. How do I choose?Choose by oil absorption first, particle size second — the two move together but not perfectly, and oil absorption is what drives the skin feel. LS-325 at 16 µm and oil absorption 40 is the slip grade…
002LS-2500 and LS-6008 are both listed at 8 µm but with different oil absorption. Which number do I trust?The oil absorption figure — the size is a nominal mean, and the two grades are produced on different lines. LS-2500 reports 8 µm with surface area 8 and oil absorption 81; LS-6008 reports 8 µm with su…
003Is your talc asbestos-free, and how is that documented?Yes. Every lot is tested for asbestos and the result is reported on the COA, which is the document a customer questionnaire is actually asking for. The test is by a recognised method on the incoming o…
004What are the current regulatory pressures on talc, and how should I plan?The direction is toward tighter documentation and, in some markets, restricted use in specific product types. The practical response is to keep a documented substitution path rather than to wait. Two …
005What is the BVL series, and do I need it?It is the same talc held to the German BVL heavy-metal limits, which are stricter than the general cosmetic specification and are used as a reference by a number of European customers. You need it if …
006What loading do you see in loose powder versus pressed powder?Loose powder 40–70%, pressed powder 25–45%. Talc is usually the base, not an additive. In loose powder the ceiling is feel: past about 70% the powder starts to fly and the pay-off becomes uneven. In p…
007How do I keep talc from flying during filling?Reduce the fine fraction and control humidity, in that order. Airborne dust during filling is mostly the sub-10 µm fraction, and a coarse grade such as LS-325 generates noticeably less of it than a 5 …
008Can I replace talc completely?In most formulas, yes, but it takes more than one material. Talc does three jobs at once — slip, oil absorption and cost — and no single substitute does all three at the same price. The usual approach…
009Does particle size affect adhesion and wear?It affects them through the oil absorption path more than directly. Finer talc with higher oil absorption takes up more of the binder and the sebum, which can improve wear because the film stays drier…
010What is the MOQ, and can you ship in a specific packaging?MOQ is 25 kg for a stock grade, 100–200 kg for a non-stock grade. Lead time 7–15 working days, samples 1 kg. Standard packing is 25 kg paper-plastic composite bags; 500 kg and 1000 kg jumbo bags are a…
011If I cut the talc in a loose powder by half, what has to change to keep the same feel?Four things, and skipping any one of them is why talc reduction usually fails on the first trial. Slip has to be replaced, not just the volume. Talc's glide comes from its platy structure, so the dire…
012Can talc be used in eye products, and what are the limits?It is permitted in eye products in most markets, and traditionally pressed eyeshadow was built on it. The limits are practical rather than categorical. The first is dust. Eye products are applied clos…
013Does talc cake up once it absorbs oil?Talc absorbs comparatively little oil and absorbs it slowly, so it is one of the less caking materials in a powder — that is part of why it was the default for so long. What caking it does show usuall…
No answer matches your search in this topic.
Not finding an answer?

Describe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.

Talk to our technical team
Become a Distributor