Inorganic Sunscreen FAQ
13 answered questions on Inorganic Sunscreen.
Inorganic Sunscreen13 answers
001Nano TiO2 or nano ZnO — which should I use?ZnO for UVA coverage and TiO2 for UVB and the higher refractive efficiency; many serious formulas use both. ZnO has a wider absorption band that extends further into UVA, which is why it appears in pr…
002Nano or non-nano? What is the regulatory difference?It is the single most consequential decision in an inorganic sunscreen, because nano status changes the notification route, the labelling and the safety dossier. Most markets define nano by primary pa…
003Your grades run from 15 nm to 160 nm. What does size change?Smaller particles give more transparency and better SPF per unit mass; larger ones give less whitening but require more loading, and above a certain size the UV performance starts to drop. 15 nm (N15E…
004Powder or pre-dispersion?Pre-dispersion if you can — it solves the hardest problem in the formula, which is wetting a nano powder completely. Nano powders have enormous surface area and agglomerate readily; getting them fully…
005How do I choose the carrier for a pre-dispersion?Match it to your emollient system and to the feel you want — the carrier becomes part of the formula. C12-15 alkyl benzoate (4015, 4513, 4560, Z-6060) is the general-purpose choice: light, dry, widely…
006How much do I need to reach a given SPF?As a rough starting point, 5–10% combined inorganic solids gets you into the moderate-SPF range, and 15–25% is where mineral-only high-SPF formulas live — but the number that matters is measured in yo…
007Does the coating matter for photostability?Yes — it is the main lever you have over the photocatalytic activity of the particle. TiO2 and ZnO generate reactive species at the surface when they absorb UV, and those species attack the surroundin…
008How do I reduce the white cast?Smaller particle size, better dispersion, and if necessary a lower loading with an organic filter carrying the rest of the SPF. White cast has two causes. Undispersed agglomerates scatter visible ligh…
009What testing documents do you provide?We provide the material documentation: COA, TDS, SDS, and the nano-specific statements a market may require. The finished-product testing — SPF, UVA-PF, critical wavelength, water resistance — is done…
010What are the MOQ and lead time for sunscreen grades?MOQ is 1 kg for a powder sample and 5 kg for a pre-dispersion sample; production quantities start at 25 kg. Lead time is 7–15 working days for stock grades, longer for a custom carrier. Because nano m…
011Why does my mineral sunscreen pill or roll up?Pilling is a film problem, not a pigment problem, and it usually has one of three causes. The first is an incompatibility between the sunscreen film and the product applied underneath. A mineral sunsc…
012Can a mineral sunscreen be made as a spray?Yes, but only as a pump spray, and the formulation window is narrow. A pressurised aerosol with mineral filters is a problem on two counts: the powder settles in the propellant system, and the inhalab…
013Can bismuth oxychloride be used as a UV filter?No. In cosmetic formulas bismuth oxychloride (CI 77163, Kingbismo® range) works as a pearlescent and soft-focus colorant: its plate-like crystals reflect visible light to give a satin lustre, but they…
No answer matches your search in this topic.
Not finding an answer?
Talk to our technical teamDescribe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.