Wet-Stripped Boron Nitride FAQ
15 answered questions on Wet-Stripped Boron Nitride.
Wet-Stripped Boron Nitride15 answers
001Which Kingbornit series should I use for Europe, the US and Japan?Start from the market, then pick the particle size. All three series behave the same in the formula — they differ only in how much soluble boron the powder can release. Kingbornit 7000 (7006 / 7012 / …
002How do I choose between the 6, 12, 15 and 20 µm grades?Choose by the skin feel you are targeting, then check the coverage requirement. 6 µm (7006, surface area 9) has the highest surface area in the range and gives the most pronounced soft-focus and cover…
003What loading do you recommend in pressed powder and in loose powder?A common starting point is 3–8%, adjusted upward for skin feel. Loadings above 15% are rare. At low loading boron nitride mainly improves spreading and slip, and contributes little to compact strength…
004Can boron nitride replace talc, and at what ratio?Partly, and not one-for-one. Replacing 20–50% of the talc is usually workable in pressed and loose powders; full replacement is not. The platy structure is similar to talc and slip is typically higher…
005What is soluble borate, and why does the grade matter for export?It is the fraction of boron that can leach out of the powder, and it is what market-specific questionnaires ask about — not the total boron content. Boron nitride itself is chemically inert. Residual …
006The coarser grades have lower specific surface area. Does that change how they behave?Yes, and it is the main reason size selection matters more than series selection. Surface area drives how much binder and oil the powder takes up, and how much light it scatters. Going from 6 µm (area…
007Does boron nitride work in liquids — foundations, creams, lip products?Yes, but for a different reason than in powders. In liquids it is a texture and slip modifier, not a structure former. The plates orient during application and reduce the drag you get from high oil-ab…
008What comes with each lot, and what can you provide for a REACH or customer questionnaire?Every lot ships with a COA reporting the specification figures for that batch, including the soluble boron figure for that grade — quoted as soluble borate % on the 7000 and 3000 series and as boron l…
009What is the minimum order and lead time for a standard grade like 7012?Standard grades are normally stocked and ship in small quantities for sampling; production volumes are quoted per order. Lead time depends on grade and quantity rather than being fixed. In practice: s…
010How does boron nitride affect coverage and whiteness?It does not add coverage, and it is not a whitening filler. Its refractive index is close enough to typical binder and filler systems that it scatters little. What it does is make the finish look soft…
011Boron nitride or a silicone elastomer powder — which gives better slip?They give different kinds of slip, and most premium powders end up using both. Boron nitride is a hard, platy mineral. The glide comes from platelets sliding over each other, and the afterfeel is dry,…
012Do I need the SI-treated boron nitride, and what does the treatment actually solve?The untreated powder is already hydrophobic enough for most anhydrous systems, so the treatment is not about wetting. It is about dispersion stability and film behaviour. The SI grade carries a surfac…
013The boron nitride feels gritty in my formula. What is going wrong?Almost always dispersion, not the grade. The platelets stack face to face and form soft agglomerates that a low-shear mixer will not break, so you feel clusters rather than individual platelets. Two f…
014How do I combine boron nitride with mica and silica?By function, not by ratio. The three do different jobs and substituting one for another is how talc-free projects go wrong. Boron nitride is the lubricant: 2–8% buys glide and pressability. Mica is th…
015Can boron nitride do anything useful in a sunscreen?It is not a UV filter and contributes essentially nothing to SPF. What it does is fix the sensory problems that make people under-apply. At 1–4% in a mineral sunscreen it improves spreadability, reduc…
No answer matches your search in this topic.
Not finding an answer?
Talk to our technical teamDescribe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.