How do I combine boron nitride with mica and silica?
By function, not by ratio. The three do different jobs and substituting one for another is how talc-free projects go wrong.
Boron nitride is the lubricant: 2–8% buys glide and pressability. Mica is the structure and the optics: it carries the pan and gives the sheen, 20–50% in an eyeshadow. Silica is the oil sink: 1–5% of a high-oil-absorption grade controls shine and stops the surface glazing over.
A workable talc-free pressed powder sits around 30–40% mica, 20–30% boron nitride, 5–10% porous silica, plus fillers and binder. The failure mode to avoid is trying to replace talc one-for-one with a single material — talc was doing slip, structure and a little oil absorption at once, and it takes three materials to cover that.
| Market | Status | Basis and conditions |
|---|---|---|
| MicaINCI MICA · CAS 12001-26-2 | ||
| EU | Permitted | CosIng listed; no Annex restriction — Heavy-metal content (Pb, As, Hg) is controlled through the general safety requirement and the supplier specification, not through an Annex limit. |
| UK | Permitted | CosIng listed; no Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
| Watch: None at ingredient level. Sericite is a fine-grained muscovite and follows the same status. | ||
| Boron nitrideINCI BORON NITRIDE · CAS 10043-11-5 | ||
| EU | Permitted | CosIng listed; no Annex restriction — No concentration limit for cosmetic use. |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
| Watch: None at ingredient level. The hexagonal (h-BN) and cubic (c-BN) forms are different materials; specification sheets should state which one is supplied. | ||
Swipe the table sideways for the full basis column →
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.