You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Wet-Stripped Boron Nitride

Boron nitride or a silicone elastomer powder — which gives better slip?

They give different kinds of slip, and most premium powders end up using both.

Boron nitride is a hard, platy mineral. The glide comes from platelets sliding over each other, and the afterfeel is dry, powdery and faintly cool. It does not compress under the finger, so it reads as smoothness on the surface rather than as cushion.

A silicone elastomer is a soft, deformable sphere. The slip comes from the spheres rolling and deforming, which gives a cushioned, velvety feel and visually fills lines and pores in a way a mineral cannot.

So boron nitride is the better choice where you need press strength, pay-off and a dry finish — a pressed powder, a talc-free compact. The elastomer is better where the product has to feel soft and forgiving — a blurring powder, a cushion. Using 2–4% of each is common and gives glide plus cushion without over-loading either.

Regulatory status — Boron nitride INCI BORON NITRIDE · CAS 10043-11-5
MarketStatusBasis and conditions
EU Permitted CosIng listed; no Annex restriction — No concentration limit for cosmetic use.
UK Permitted No Annex restriction
US Permitted No ingredient-level restriction
China Permitted IECIC
Japan Permitted General cosmetic ingredient
ASEAN Permitted ACD, no Annex entry
Korea Permitted MFDS cosmetic ingredient standard
Canada Permitted Hotlist: not listed

Swipe the table sideways for the full basis column →

Watch: None at ingredient level. The hexagonal (h-BN) and cubic (c-BN) forms are different materials; specification sheets should state which one is supplied.

Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor