You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Wet-Stripped Boron Nitride

How do I choose between the 6, 12, 15 and 20 µm grades?

Choose by the skin feel you are targeting, then check the coverage requirement.

6 µm (7006, surface area 9) has the highest surface area in the range and gives the most pronounced soft-focus and coverage, but slip is weaker and it is more prone to agglomeration. 12 µm (7012, surface area 4) is the balance point most pressed and loose powders are built around. 15 and 20 µm (7015, 7020, surface area 3 and 2) give the most slip and the easiest spreading, at the cost of soft-focus.

A practical rule: loose powder and blush tend toward 12–15 µm, pressed eyeshadow toward 15–20 µm where glide matters more than coverage, and products where you want pore blurring toward 6 µm.

Regulatory status — Boron nitride INCI BORON NITRIDE · CAS 10043-11-5
MarketStatusBasis and conditions
EU Permitted CosIng listed; no Annex restriction — No concentration limit for cosmetic use.
UK Permitted No Annex restriction
US Permitted No ingredient-level restriction
China Permitted IECIC
Japan Permitted General cosmetic ingredient
ASEAN Permitted ACD, no Annex entry
Korea Permitted MFDS cosmetic ingredient standard
Canada Permitted Hotlist: not listed

Swipe the table sideways for the full basis column →

Watch: None at ingredient level. The hexagonal (h-BN) and cubic (c-BN) forms are different materials; specification sheets should state which one is supplied.

Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor