You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Wet-Stripped Boron Nitride

Which Kingbornit series should I use for Europe, the US and Japan?

Start from the market, then pick the particle size. All three series behave the same in the formula — they differ only in how much soluble boron the powder can release.

Kingbornit 7000 (7006 / 7012 / 7015 / 7020) is held to soluble borate ≤0.02%, which is 200 ppm, and is the usual choice for the EU and US. Kingbornit 9000 (9006 / 9011 / 9015 / 9020) is specified to boron leaching ≤20 ppm — ten times tighter — and is the series we normally ship against Japanese requirements. Kingbornit 3000 (3002 / 500 / 3012 / 3015 / 3020) sits at ≤0.06%, with 3002 at ≤0.1%.

All three series share the same 6–20 µm size ladder and the same specific surface area at each size, so changing series does not change the skin feel. If your target market is still open, 7000 covers the widest range of customer questionnaires.

Regulatory status — Boron nitride INCI BORON NITRIDE · CAS 10043-11-5
MarketStatusBasis and conditions
EU Permitted CosIng listed; no Annex restriction — No concentration limit for cosmetic use.
UK Permitted No Annex restriction
US Permitted No ingredient-level restriction
China Permitted IECIC
Japan Permitted General cosmetic ingredient
ASEAN Permitted ACD, no Annex entry
Korea Permitted MFDS cosmetic ingredient standard
Canada Permitted Hotlist: not listed

Swipe the table sideways for the full basis column →

Watch: None at ingredient level. The hexagonal (h-BN) and cubic (c-BN) forms are different materials; specification sheets should state which one is supplied.

Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor