Surface Treatment FAQ
13 answered questions on Surface Treatment.
Surface Treatment13 answers
001When is a surface treatment worth paying for?When the powder has to survive a system it was not born to live in — a silicone phase, a W/O emulsion, a high-humidity wear claim, or a compact that has to press hard. Untreated mineral powder is hydr…
002There are eleven treatment types. How do I narrow it down?By what you are trying to fix — that is what separates them. Dimethicone (SI) is the general-purpose choice: chemically bonded, shear-resistant, works over a wide temperature range, gives strong water…
003Can the SI treatment be applied to any grade?Yes — to all series and particle sizes. That is stated on the page and it is the practical advantage of the range. So Kingbornit 3002 SI, Kingsica 3028 SI, Kingruti 0205 SI, Kingtalfer LS-800 SI and K…
004Does a surface treatment change the colour or the coverage?Very little, and what does change is the dispersion, which can look like a colour change until you know why. The treatment is a molecular layer on the surface, so it does not alter the refractive inde…
005What is the difference between triethoxycaprylylsilane and dimethicone treatment?Both make the surface hydrophobic; the silane does it without adding a silicone feel, which is why it dominates in UV filters. Triethoxycaprylylsilane bonds directly to the surface hydroxyls and gives…
006How do I verify that the treatment is actually there?Three quick checks, in increasing order of effort. First, the water float test: a treated powder floats on water and an untreated one wets and sinks. It is crude but it tells you immediately whether t…
007Does treating a powder affect its regulatory status?Yes, in the sense that the treatment agent becomes part of the ingredient declaration and must itself be permitted. A treated powder is not the same regulatory object as the untreated one: the coating…
008Do I need to change the loading when I switch to a treated grade?Usually not — start at the same loading and adjust on the result. The treatment is a small weight percentage on the surface, so the delivered pigment or powder content per kilo is essentially unchange…
009What loading of treated powder do you see in a W/Si system?It depends on the powder, but the treated grades are what make high loadings possible in silicone-continuous systems. In a W/Si foundation, treated TiO2 and treated iron oxides commonly run at 8–15% c…
010Is there a treatment for a hydrophilic system?Yes — the hydrophilic treatment exists for water-based and O/W systems where you want improved dispersion without making the surface hydrophobic. It is the counterpart to the lipophilic treatments: in…
011What is the MOQ for a treated grade?25 kg for a stock treated grade; a treatment applied to a grade we do not normally carry is 100–200 kg, because the treatment line has to be set up and cleaned. Lead time is 7–15 working days for stoc…
012What dosage of treatment agent is used, and what happens if it is too low?Treatments are applied at roughly 1–3% on the weight of the powder, depending on the agent and the surface area of the grade. A finer powder needs more, because there is more surface to cover. Too low…
013I changed treatment supplier on the same base powder. What has to be re-qualified?Treat it as a new raw material, not as a purchasing change. The base powder is the same; the surface chemistry is not, and the surface is what your formula interacts with. Re-qualify in this order. Di…
No answer matches your search in this topic.
Not finding an answer?
Talk to our technical teamDescribe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.