What dosage of treatment agent is used, and what happens if it is too low?
Treatments are applied at roughly 1–3% on the weight of the powder, depending on the agent and the surface area of the grade. A finer powder needs more, because there is more surface to cover.
Too low a dosage is worse than no treatment at all, because it produces a partially covered surface. Some of the particle is lipophilic and some is still hydrophilic, so the powder wets inconsistently: you get viscosity drift between lots, dispersion that looks fine in the premix and separates in the finished product, and a film whose water resistance is unpredictable.
Too high a dosage is easier to live with — the main cost is a softer feel and a little more binder demand — but it also dilutes the pigment or filler, which matters when the grade is specified by assay.
The way to know is to ask for the dosage on the TDS and to verify the treatment is present, not just specified. We report the agent and its level for every treated grade.