You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Pigment Formulation FAQ

9 answered questions on Pigment Formulation.

Pigment Formulation9 answers
001Ultramarine in an acidic formula — is pH control enough?Sometimes, but if the product has to be acidic, ultramarine is the wrong blue. Ultramarine (CI 77007) is acid-sensitive and can decompose with release of hydrogen sulphide, which shows up as odour and…
002What does a lip pigment have to satisfy beyond the CI list?Three things on top of permitted use: migration resistance, odour, and the narrower lip list itself. Permitted use is the gate. Lip products are partly ingested, and every market runs a shorter list f…
003Can a UV absorber rescue a pigment with poor light fastness?It delays the fade; it does not fix it. If light fastness is the weakness, treat it as a selection criterion rather than something to patch later. Assess first. Draw the pigment down in the target bas…
004How much pigment is enough for colour, and what goes wrong at high loading?There is no general number — it depends on the pigment's strength, the base colour and the target depth. Typically 0.5–10%, higher for deep shades. Strength varies widely. Organic lakes are strong, so…
005Speckles and uneven colour — wetting, dispersion or stabilization?Usually all three, in that order. Work through them in sequence instead of adding dispersant and hoping. Wetting comes first. Pigment has a large surface area and adsorbs air, so tipping it dry into a…
006Is pigment surface treatment mandatory in a silicone system?Not by rule, but in a silicone system carrying a water-resistance or long-wear claim it is close to unavoidable. The treated grades on our list carry the same pigment with different layers: SI for sli…
007Which compliance documents should travel with a colourant?Four groups: CI number and permitted-use statement, heavy-metal report, microbiological report, and whatever the target market adds on top. The CI statement is the core document. It has to name the CI…
008Why does colour rub off a pressed powder?It is adhesion and compatibility, not a pigment that is inherently loose. Three causes. The pigment does not bond to the platelet fillers — talc, mica — so it sits at the surface and wipes away. The f…
009Batch-to-batch colour drift — what can the formula actually do?Fix the grade, control incoming batches, and build a little tolerance into pale shades. The formula cannot eliminate it. Pigments are mineral or synthetic and natural variation exists — inorganics esp…
No answer matches your search in this topic.
Not finding an answer?

Describe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.

Talk to our technical team
Become a Distributor