Calcined Kaolin FAQ
11 answered questions on Calcined Kaolin.
Calcined Kaolin11 answers
001Calcined or hydrous kaolin — what is the actual difference in the formula?Calcination drives off the water of crystallisation and sinters the platelets, which raises whiteness, hardness and oil absorption. Hydrous kaolin stays softer and is used where you want a clay that d…
0025000 at 2 µm or GL03 at 3 µm?2 µm if you want maximum oil absorption and a matte finish; 3 µm if you want easier dispersion and a less dry feel. The finer grade has more surface per gram, so it takes up more sebum and gives a fla…
003Why is calcined kaolin used for press strength?Because the calcination step creates a harder, more angular particle that interlocks under pressure instead of sliding past its neighbours. Soft platy fillers such as talc and mica slide, which is wha…
004How much can I load, and what does it do to skin feel?5–15% is the usual band. Below 5% you mostly get a mattifying effect with little structural contribution; above 15% the dryness becomes the dominant sensation. At 8–12% you get both the oil absorption…
005Does higher calcined kaolin loading mean better oil control?Up to a point, then it plateaus and starts to cost you comfort. Oil absorption rises with loading, but once the powder is saturated the excess oil simply sits on top of the film, and the dry feel of a…
006Can calcined kaolin replace part of the talc in a pressed powder?Yes, and it is one of the easier substitutions — 20–40% of the talc is a reasonable starting point. Both are platy aluminosilicates, so the texture translates without a big reformulation. What changes…
007Is the whiteness stable across lots?The specification holds whiteness within a defined band, but calcined kaolin is a natural-mineral product, so there is lot-to-lot variation inside that band. For a tinted product, that matters more th…
008What does the 'global regulation compliant' series change?It is produced and tested against a tighter heavy-metal profile, which is what most market-specific cosmetic questionnaires actually ask about. The base grade meets the general cosmetic specification.…
009How does it disperse, and what equipment do I need?It wets out slowly but disperses cleanly once wetted — the difficulty is the initial wetting, not the breakdown. In a dry powder blend it is simply blended. In a slurry or a cream it needs shear: a hi…
010What is the MOQ and how is it packed?25 kg per bag as standard, with 500 kg jumbo bags for volume orders. MOQ for a stock grade is 25 kg; a non-stock grade is typically 100–200 kg. Lead time runs about 7–15 working days. Samples are 1 kg…
011My pressed powder crumbles or caps after I added kaolin. What went wrong?Usually too much kaolin, or too little binder to compensate for it. Calcined kaolin is a strong oil absorber, so it takes binder out of circulation — the pan is under-bound even though the binder perc…
No answer matches your search in this topic.
Not finding an answer?
Talk to our technical teamDescribe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.