How much can I load, and what does it do to skin feel?
5–15% is the usual band. Below 5% you mostly get a mattifying effect with little structural contribution; above 15% the dryness becomes the dominant sensation.
At 8–12% you get both the oil absorption and a measurable improvement in press hardness without the formula reading as powdery. That is the band most oil-control pressed powders are built in.
In a loose powder the ceiling is higher because there is no press strength requirement — 20% is workable if the feel still reads smooth.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Crystalline silica is classified Carc. 1A by inhalation, but cosmetic kaolin is a hydrated aluminium silicate, not free crystalline silica; the respirable crystalline silica content belongs in the specification. |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Note that "crystalline silica" restrictions apply to free crystalline silica, not to kaolinite.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.