How does it disperse, and what equipment do I need?
It wets out slowly but disperses cleanly once wetted — the difficulty is the initial wetting, not the breakdown.
In a dry powder blend it is simply blended. In a slurry or a cream it needs shear: a high-speed disperser at 1500–2500 rpm for 15–20 minutes is usually enough, and a bead mill gives a tighter particle size distribution if the finish matters. Adding it to the oil phase before the water phase reduces the lumping that happens when a fine calcined clay hits water directly.
If you see specks in the finished product, check for undispersed lumps rather than oversized particles — calcined clay forms them readily.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Crystalline silica is classified Carc. 1A by inhalation, but cosmetic kaolin is a hydrated aluminium silicate, not free crystalline silica; the respirable crystalline silica content belongs in the specification. |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Note that "crystalline silica" restrictions apply to free crystalline silica, not to kaolinite.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.