My pressed powder crumbles or caps after I added kaolin. What went wrong?
Usually too much kaolin, or too little binder to compensate for it. Calcined kaolin is a strong oil absorber, so it takes binder out of circulation — the pan is under-bound even though the binder percentage on paper has not changed.
Two things to try. Raise the binder by 10–20% relative to the kaolin you added, and bring in a small amount of a platy material such as mica to restore the press strength that kaolin alone does not provide. Kaolin improves hardness up to a point and then reverses, because past roughly 15–20% there is not enough binder left to cover the increased surface area.
If the compact is capping rather than crumbling, look at the press instead. Too fast a cycle and an uneven fill produce capping that no formula change will fix.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Crystalline silica is classified Carc. 1A by inhalation, but cosmetic kaolin is a hydrated aluminium silicate, not free crystalline silica; the respirable crystalline silica content belongs in the specification. |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Note that "crystalline silica" restrictions apply to free crystalline silica, not to kaolinite.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.