You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Powder Materials FAQ

Boron nitride, spherical silica, mica, talc and pigments — how to choose, which system each fits.

Powder Materials13 answers
001What does boron nitride actually do in cosmetics?Hexagonal boron nitride is a multifunctional platy powder: it delivers lubricity, press strength, lustre and thermal conductivity at the same time, which is hard to replicate with a single alternative…
002What is the difference between spherical and regular silica?The difference is shape and porosity, and that directly determines oil absorption, skin feel and optical behaviour. Regular silica consists of irregular particles and agglomerates; spherical silica is…
003Why are formulators moving away from bismuth oxychloride?Bismuth oxychloride was once the workhorse for pearlescent effects, with strong lustre and good coverage, but photostability is its unavoidable weakness: it darkens and greys under UV and strong light…
004Can mica and talc be substituted for each other?Not on an equal-weight basis. Their functional profiles differ: mica is platy and provides lustre and adhesion, while talc is platy but softer, providing slip and oil absorption with weaker coverage. …
005What is the difference between wet-delaminated and dry-milled powders?The core difference is platelet integrity and aspect ratio. Wet delamination cleaves along the platelet planes in a liquid medium, causing little damage and yielding a high aspect ratio. Dry milling r…
006How do I choose between triethoxycaprylylsilane, PDMS and stearic acid treatments?Choose based on the continuous phase: water-in-oil, oil-in-water, or anhydrous. Surface treatment exists to make the powder compatible with that phase. Triethoxycaprylylsilane suits water-in-oil and a…
007How is oil absorption actually measured, and is a higher value better?Oil absorption is measured to GB/T 5211.15 or ISO 787-5: oil is added dropwise to the powder and worked in until the paste can be lifted as a single mass without sticking to the plate. The result is e…
008What is the relationship between specific surface area and oil absorption?Broadly positively correlated, but not linear, and porous grades deviate most. BET specific surface area measures the total accessible area including pore walls; oil absorption measures how much oil t…
009How do I balance whiteness and coverage, and what happens if I overload titanium dioxide?Whiteness and coverage follow different curves: coverage depends on refractive index contrast, whiteness on reflectance. Titanium dioxide maxes out both at once, so the problem is rarely not white eno…
010How do I match mica particle size to the gloss level I want?Mica gloss comes from specular reflection off its platelets. The larger and more intact the platelet, the larger each reflective surface and the more sparkle; finer grades read as a soft silky sheen. …
011What do Halal, Kosher and Vegan certification mean for a powder, and what extra paperwork is needed?The three schemes do not audit the same thing, and treating them as one file wastes money. A Halal certificate looks at two ends: whether the material contains animal-derived content or alcohol, and w…
012Which powder properties should I screen out for a formula for reactive, redness-prone skin?First the boundary: whether the finished product can carry a claim is a matter for the safety assessment and the efficacy evidence. What the ingredient side can do is screen out the known risk factors…
013Is R457 the same figure as CIE whiteness, and can I compare them?Whiteness is a convention, not a number. Comparing values from different conventions gives a wrong answer. Two dominate. R457, also called ISO brightness, measures reflectance in the blue at 457 nm an…
No answer matches your search in this topic.
Not finding an answer?

Describe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.

Talk to our technical team
Become a Distributor