What is the difference between wet-delaminated and dry-milled powders?
The core difference is platelet integrity and aspect ratio. Wet delamination cleaves along the platelet planes in a liquid medium, causing little damage and yielding a high aspect ratio. Dry milling relies on mechanical shear, which is efficient but fractures platelets and creates fines and debris.
In use, wet-delaminated boron nitride, talc and mica have thinner, more intact platelets, giving clearer lustre, better adhesion and more efficient coverage and soft focus at the same dose. Dry-milled grades scatter light more diffusely and feel rougher.
The cost gap comes from yield and process complexity. For premium pressed powders and lipsticks where lustre and adhesion matter, wet-delaminated grades usually deliver better value.