You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Powder Materials

How is oil absorption actually measured, and is a higher value better?

Oil absorption is measured to GB/T 5211.15 or ISO 787-5: oil is added dropwise to the powder and worked in until the paste can be lifted as a single mass without sticking to the plate. The result is expressed as grams of oil per 100 g of powder.

The number is neither good nor bad on its own — it depends what you need. High values (porous silica, kaolin) mean the powder absorbs sebum and delivers matte, soft-focus results, which is what oil-control formulas want. Low values (treated talc, mica, boron nitride) mean the powder will not steal oil from your formula, so the cream stays emollient and stable.

Two practical caveats. Different test oils give different numbers — linseed oil versus DOP can differ by 10-20%, so confirm the oil type before comparing datasheets across suppliers. And oil absorption is a static figure: what actually drives skin feel is the absorption rate, which surface treatment can cut substantially without changing the endpoint. Two powders with identical oil absorption can feel completely different. Our COA states both the standard and the oil type used.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor