How do I balance whiteness and coverage, and what happens if I overload titanium dioxide?
Whiteness and coverage follow different curves: coverage depends on refractive index contrast, whiteness on reflectance. Titanium dioxide maxes out both at once, so the problem is rarely not white enough — it is too white.
TiO2 has a refractive index around 2.6, the highest of any common cosmetic powder, and 3-5% already delivers ample coverage. Above 8% you hit three problems: the finish turns chalky and loses translucency, which is very visible in pressed and loose powders; spreadability drops and application feels draggy; and cost climbs while coverage has already plateaued.
A layered approach works best: TiO2 for coverage at 3-5%, calcined kaolin or talc for bulking and cost, mica or boron nitride for translucency and luminosity, plus iron oxides for hue adjustment. If you want white with depth rather than white like flour, either move part of the TiO2 to a surface-treated grade or use a coarser rutile grade at D50 200-300 nm — similar coverage efficiency, noticeably better translucency.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Restricted | Annex IV / 143 (colorant); Annex VI / 27 and 27a (UV filter); Annex III / 321 (fine powder) — UV filter up to 25% (27 and 27a combined). Nano form must not be used in applications that may expose the lungs by inhalation. Fine powder with 1% or more of particles of aerodynamic diameter 10 micrometres or less: 25% in loose face powder, 1.4% (consumer) or 1.1% (professional) in aerosol hair products, and no lung-exposing applications otherwise. |
| UK | Restricted | Retained EU law, same entries — Wording carried over from the EU entries. |
| US | Restricted | 21 CFR 73.2575 (colour additive); 21 CFR 352 (OTC sunscreen active) — Up to 25% as an OTC sunscreen active. No federal nanomaterial-specific restriction in cosmetics. |
| China | Restricted | Safety and Technical Standards: permitted colorant; permitted UV filter 25% — Nano form requires separate registration and labelling. |
| Japan | Restricted | Quasi-drug: UV scatterer handled as a quasi-drug additive — No separate concentration ceiling, but an SPF or PA claim requires quasi-drug approval, and there the UV scatterer is handled as an additive that must meet the quasi-drug ingredient specification. Used purely as a colourant or bulking agent, no approval is needed. |
| ASEAN | Restricted | ACD Annex IV (colorant) and Annex VII (UV filter, 25%) — Same 25% ceiling as the EU. |
| Korea | Restricted | MFDS permitted colorant; permitted UV filter 25% — Nano form must be declared. |
| Canada | Restricted | Hotlist: permitted colorant and sunscreen active — Sunscreen monograph limit 25%. |
Swipe the table sideways for the full basis column →
Watch: The EU Carc. 2 (inhalation) classification of powder forms was annulled and the annulment was confirmed by the Court of Justice on 1 Aug 2025 — no CMR classification currently applies. Separately, the food-additive ban (E 171, Regulation (EU) 2022/63) concerns food only and does not affect cosmetic use; the SCCS oral-care opinion is still pending.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.