You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Powder Materials

Which powder properties should I screen out for a formula for reactive, redness-prone skin?

First the boundary: whether the finished product can carry a claim is a matter for the safety assessment and the efficacy evidence. What the ingredient side can do is screen out the known risk factors and narrow the field.

Four properties to exclude or control. Coarse particles: a platy powder with D90 above 30 µm is mechanical friction during application, so go finer wherever the formula allows, and compacts show it most. High oil absorption: above 200 the powder strips surface oil and the tight after-feel usually traces back here, so 50-120 is a steadier range. Free metal impurities: measure iron, nickel, cobalt and chromium, since nickel and cobalt are common contact sensitisers and colour powders carry more of them. And pH: a powder slurry sitting between 4.5 and 7.5 supports the formula buffer, while a grade outside that range fights it.

One indirect effect is worth naming: a powder with a high bioburden forces a heavier preservative system, and a heavier preservative system adds its own irritation potential. Microbial limits are not only a regulatory formality.

In practice, screen down to two or three candidates on those four properties, then run a loading ladder in a prototype at, say, 100%, 60% and 40% of the usual level and find the lowest one that still delivers the texture. A lower loading is usually a lower risk, and this step buys more than swapping grades does.

Last point: keep efficacy language out of the ingredient description. Specification, particle size, treatment and measured data are enough.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor