Titanium Dioxide FAQ
13 answered questions on Titanium Dioxide.
Titanium Dioxide13 answers
001Rutile or anatase: which one should I start with?Rutile for almost everything, anatase only where you want a specific optical effect. Rutile scatters light more efficiently and is the grade the industry builds coverage around, so it reaches the same…
002Your rutile grades run from 210 to 420 nm. How does size change the result?Smaller particles give more covering power per kilo but scatter less light back at you; larger ones give a brighter, cleaner white and easier wetting. T-60 at 210 nm and CR50 at 250 nm and T-90 at 280…
003What is the difference between aluminium hydroxide coating and aluminium hydroxide plus silica?Alumina alone gives photostability and dispersion; adding silica on top improves the surface's resistance to the photoactive reaction that TiO2 can trigger in a formula. That matters when the TiO2 sit…
004What loading do you see in foundation, pressed powder and sunscreen?Foundation usually lands at 5–12%, pressed powder at 3–8%, and sunscreen at whatever the SPF target dictates — often 3–8% for a moderate SPF in combination with an organic filter, higher for mineral-o…
005Is your TiO2 nano or non-nano? How do I document that?It is non-nano. The rutile grades are specified at 210–420 nm mean particle size and the anatase grades at 200–220 nm, all well above the 100 nm threshold used in most nano definitions. For a customer…
006My coverage dropped after switching to a finer grade. Why?Because fines that are not fully dispersed act as light scatterers in the wrong size range — they dull the film instead of whitening it. Going from a 400 nm grade to a 210 nm grade roughly doubles the…
007Does TiO2 whiten as much in a water-based system as in an anhydrous one?Less, and the gap is bigger than most people expect. TiO2 needs air voids around the particle to scatter efficiently. In an anhydrous base the oil wets the surface only partially, leaving those voids;…
008What paperwork comes with each lot?A batch COA, the TDS, and the SDS. Additional documents — heavy metal statements, allergen declarations, non-nano statements, REACH registration status — are issued on request against the specific gra…
009Which grade should I use in a compact where hardness matters?T-48 or T-02 in rutile, or T-01 in anatase. Hardness in a pressed compact comes from particle packing and from the binder, and coarser particles pack into a denser, stronger structure. The 400–420 nm …
010What are MOQ, lead time and packaging?MOQ is typically 25 kg for a stock grade and 100–200 kg for a production run of a non-stock grade. Lead time is roughly 7–15 working days depending on grade and quantity; stock items ship sooner. Stan…
011My TiO2 leaves a chalky white cast. How do I fix it?White cast is TiO2 doing its job too well in the wrong place. It scatters across the visible spectrum, and past a certain loading that scatter reads as a white film rather than as coverage. Three leve…
012Does TiO2 cause photocatalytic degradation, and how do I control it?Uncoated TiO2 is photocatalytic. It generates radicals under UV, and in a formula that shows up as fragrance breakdown, colour fading and, in the worst case, rancidity in the oil phase. This is a real…
013Is TiO2 permitted in lipstick, and does it change the feel?Yes, and it is common — it is what gives a lipstick opacity and makes a red read as red rather than as a stain. Two caveats. The regulatory one: TiO2 for lip use is permitted in most markets, but the …
No answer matches your search in this topic.
Not finding an answer?
Talk to our technical teamDescribe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.