You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Surface Treatment Application FAQ

Answers on setting treatment dosage from specific surface area, expected oil absorption drop, and verifying treatment performance in powder formulas.

Surface Treatment Application 10 answers
001Treatment dosage scales with surface area. How do I set it for a new grade?There is no universal figure. Dosage is set per powder, from its specific surface area and from what you want the treatment to do. The rule is straightforward: the higher the specific surface area, th…
002How far does oil absorption drop after treatment — and when is that a problem?Usually a clear drop, and the size of it depends on agent type and coverage. For most formulas that drop is the main reason to pay for treatment. The mechanism: the agent occupies active sites on the …
003Does treatment change SPF enough that I have to re-test?Yes, and the direction depends on the agent and the loading. It cannot be assumed either way — it has to be measured. Two mechanisms act at once. Better dispersion means the particles sit more evenly …
004Will a treatment shift the shade enough to need re-matching?Slightly, and mostly through gloss, transparency and saturation rather than hue. Pale and bright shades are the sensitive ones. The layer changes refractive index and scattering at the surface, so wha…
005Which processes break down a treatment layer?Three-roll milling, bead milling, high-shear homogenising, and long hot emulsification. All four apply shear and heat together, which is what a treatment layer tolerates least. When the layer fails yo…
006Can I claim silicone-free when the powder is SI-treated?No — not if the treatment is a silicone. This is the most common place a "silicone-free" claim fails. "SI" is a family label, not an ingredient. The agent may be dimethicone, a polymethylsiloxane or a…
007Switching from one treatment type to another — what is the full re-test list?Six items minimum: dispersion, viscosity, stability, skin feel, colour where a pigment is involved, and whatever functional claim the product makes. Dispersion and viscosity move first, because the ag…
008Can treatment stop a heavy powder from settling?It helps, but it cannot change the physics. Settling is a density and particle-size problem; treatment only changes surface compatibility. What treatment does: better compatibility with the continuous…
009Does treatment raise tinting strength? Do I have to cut the loading?Yes, usually — and yes, expect to cut the loading when you move from an untreated to a treated pigment. The gain is a dispersion effect, not a stronger pigment. Fewer agglomerates mean more effective …
010How do I prove a treatment is working, layer by layer?Four layers, in this order: surface properties, dispersion state, formula performance, then stability. Skipping to the last one is why treatments get blamed for problems they did not cause. Surface fi…
No answer matches your search in this topic.
Not finding an answer?

Describe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.

Talk to our technical team
Become a Distributor