You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Oil-based Slurry FAQ

14 answered questions on Oil-based Slurry.

Oil-based Slurry14 answers
001Should I use a pre-dispersed slurry or mill the pigment myself?Slurry if you are under roughly 200 kg per batch or you do not have a bead mill; dry pigment if you are large enough to amortise the equipment and the cleaning. The slurry saves you the milling step, …
002Your slurries run from 40% to 73% pigment content. How do I choose?Choose by the pigment, not by a preference for higher concentration. High loadings are achievable with dense, well-behaved pigments: TiO2 at 73% (867W), black iron oxide at 70% (926B), and the treated…
003What does the DSG treatment do in a slurry?It makes the pigment surface lipophilic so the dispersion stays stable in the oil phase and the film wears longer. DSG — disodium stearoyl glutamate — is a surface treatment applied to the pigment bef…
004What is the AMQ series for long-wearing foundation?It is a set of four dispersions built for transfer-resistant foundations, where the film has to stay put on oily skin for a full day. The four grades are TiO2 (869W, 60%), red iron oxide (116R, 55%), …
005The carrier is isononyl isononanoate. Can I have a different one?Yes, for a production quantity. The standard carrier is chosen because it is a good general-purpose emollient with a dry feel and wide compatibility. Common alternatives are caprylic/capric triglyceri…
006How is a slurry declared for regulatory purposes?As the pigment plus the carrier plus the treatment, which means the CI number alone is not the whole declaration. On an INCI list, the dispersion appears as the pigment's CI number together with the c…
007Why does the slurry settle, and how do I redisperse it?Settling is normal for a high-loading dispersion; hard caking is not, and the difference is usually storage temperature and time. A soft sediment that redisperses with a paddle is expected and harmles…
008What is the MOQ and the shelf life?MOQ is 5 kg for a stock grade and 25 kg for a production quantity; a custom carrier is 100–200 kg. Shelf life is typically 24 months from production in an unopened container. Lead time is 7–15 working…
009Can I use an oil-based slurry in a lipstick?Yes, and it is a sensible route, because a lipstick is an anhydrous system and the standard carriers — isononyl isononanoate, C12-15 alkyl benzoate — are already typical lipstick emollients. Three thi…
010I am switching from dry pigment to slurry. What has to change in the formula?Three things, and the first one catches most people. The carrier becomes an ingredient. A 60% slurry added at 10% puts 4% of carrier into the formula, and that carrier is an emollient your oil phase n…
011How do I convert pigment content in a slurry into a formula percentage?Divide the pigment percentage you want by the slurry's pigment content. If the formula calls for 8% TiO2 and you are using an 867W slurry at 73%, you need 8 ÷ 0.73 = 11.0% of slurry. That 11.0% delive…
012AS or DSG treatment — what is the difference in a slurry?Both are surface treatments that make the pigment lipophilic, and both improve dispersion and wear. The practical difference is hand feel and the chemistry they suit. DSG — disodium stearoyl glutamate…
013Can a slurry be used in a pressed powder?Not normally, and it is worth understanding why rather than testing it. A pressed powder is a dry blend held together by a small amount of binder, and the balance between powder surface and binder is …
014A batch came out off-shade. Is it the slurry or my formula?Check in this order: the container, the batch record, then the formula. First the container. A high-loading slurry separates, and the top layer is carrier-rich while the bottom is pigment-rich. If the…
No answer matches your search in this topic.
Not finding an answer?

Describe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.

Talk to our technical team
Become a Distributor