You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Oil-based Slurry

How do I convert pigment content in a slurry into a formula percentage?

Divide the pigment percentage you want by the slurry's pigment content.

If the formula calls for 8% TiO2 and you are using an 867W slurry at 73%, you need 8 ÷ 0.73 = 11.0% of slurry. That 11.0% delivers 8% pigment and 3.0% carrier, and the 3.0% has to come out of your oil phase somewhere.

The error to avoid is treating the slurry percentage as the pigment percentage. Adding 8% of a 73% slurry delivers 5.8% TiO2, and the resulting loss of coverage is easy to blame on the pigment rather than on the arithmetic.

For a multi-pigment shade, do the calculation for each pigment separately, then check the total slurry load is still workable. Four pigments at their individual rates can add up to 30% of slurry, which is a lot of carrier to absorb.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor