I am switching from dry pigment to slurry. What has to change in the formula?
Three things, and the first one catches most people.
The carrier becomes an ingredient. A 60% slurry added at 10% puts 4% of carrier into the formula, and that carrier is an emollient your oil phase now has to account for. Rebalance the oil phase rather than simply adding the slurry on top of the existing formula.
The colour loading changes. You are adding colour as a fraction of the slurry, so calculate against delivered pigment, not against slurry weight — treating the two as the same is the classic error that produces a batch 30% too weak.
The process simplifies. No milling, no dust, but the slurry has to be mixed in fully at a temperature where it flows, and the batch colour should be checked before filling, because adjusting afterwards with dry pigment is no longer straightforward.