Can I use an oil-based slurry in a lipstick?
Yes, and it is a sensible route, because a lipstick is an anhydrous system and the standard carriers — isononyl isononanoate, C12-15 alkyl benzoate — are already typical lipstick emollients.
Three things to check. Carrier compatibility with your wax blend: a slurry built on a light ester can soften a hard wax structure more than expected, so adjust the wax ratio rather than the slurry level. Pigment content: at 60–73% you are adding relatively little carrier per unit of colour, which is an advantage in a shade-critical product. Temperature: incorporate below the point where the carrier volatilises, and mix long enough to break the slurry down fully into the melt.
The DSG-treated grades are the ones to specify if the lipstick needs water resistance or a long-wear claim.