Can a slurry be used in a pressed powder?
Not normally, and it is worth understanding why rather than testing it.
A pressed powder is a dry blend held together by a small amount of binder, and the balance between powder surface and binder is what makes it press. An oil-based slurry brings 27–60% free oil into a system designed around perhaps 5% binder. The oil floods the binder, the compact goes soft or greasy, and the pan will not hold.
The exception is a wet-pressed or cream-to-powder formula, where a liquid phase is part of the design. There a slurry can be used, and it actually helps colour uniformity because the pigment arrives pre-dispersed.
For a conventional pressed powder, dry pigment — or a water-based dispersion in a wet granulation step — are the routes that work.