You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Spherical Porous Silica FAQ

14 answered questions on Spherical Porous Silica.

Spherical Porous Silica14 answers
001How do I choose between oil absorption 60 and 300?By how much oil you need taken out of the formula, and how dry you can afford the finish to feel. Low oil absorption (Kingsica S060 at 60, TR070SI at 70) suits formulas that already contain enough oil…
002What is the practical difference between S201 and S300, and between S202 and S302?Particle size is nearly the same; oil absorption is not. S201 is 7 µm at 200, S300 is 7 µm at 300. S202 is 5 µm at 200, S302 is 5 µm at 300. So these pairs let you change oil absorption without changi…
003Which grade gives soft-focus, and at what loading?The fine, mid-absorption spherical grades — 2028 at 2 µm and 3028 at 3 µm — are the usual starting point, typically at 2–6%. Soft-focus comes from the spherical shape and the pore-size distribution ra…
004Which grades are for scrub and cleansing textures?The PC series — PC20 (20 µm), PC100 (100 µm), PC150 (150 µm) and PC200 (200 µm), at oil absorption 100–130. For scrubs the particle size sets the sensation: 100–200 µm reads as a clearly perceptible s…
005Does higher oil absorption mean better oil control on skin?Not necessarily. It means the powder takes up more oil in a beaker, which is a formulation property and only an indicator of what happens on skin. On skin, oil control depends on how much powder is ac…
006My formula feels tight and dry after adding silica. How do I rebalance it?Drop the oil absorption first, then the loading, then add back slip. High-absorption silica removes part of the oil phase along with the sebum, so the film ends up under-plasticised. Moving from a 300…
007How do I stop silica from agglomerating in the premix?Wet it out before it goes into the main batch, and keep the shear high enough while it disperses. Spherical porous silica has a large internal pore volume, so it pulls binder and oil into the pores qu…
008What documentation is needed to ship silica to the EU and the US?COA per lot, TDS and SDS are the baseline. Beyond that, the requirement depends on the form and on how the customer's own product is classified. Two questions come up most often. First, whether the ma…
009Is silica a direct replacement for talc in a talc-free reformulation?It can support the claim, but it is not a texture-for-texture swap. Talc is platy and provides slip plus moderate oil absorption. Spherical silica provides oil absorption plus ball-bearing glide and s…
010What are the MOQ and lead times for Kingsica grades?Stocked standard grades move quickly at sample scale; the commercial quantity and lead time are quoted per grade and destination. The wide grade range — OA from 60 to 300, size from 2 to 200 µm — mean…
011What particle sizes are available, and how do I convert mesh to microns?Our range runs from roughly 2 µm to 200 µm. The mesh figure some suppliers quote is a screen size, not a particle size, and the conversion is approximate: 325 mesh is about 44 µm, 800 mesh about 18 µm…
012Is cosmetic-grade silica safe on skin, and what should I check in the documentation?The material is amorphous synthetic silica, not crystalline quartz, and that distinction is the whole safety story — crystalline silica is the respirable hazard, amorphous silica is not, and cosmetic …
013Oil absorption or specific surface area — which number should drive my choice?Oil absorption is the number to formulate with; specific surface area is the number that explains it. The two track each other closely, because more surface means more oil held on it, so a grade at 30…
014How does silica compare with talc and kaolin for oil control?Silica absorbs the most per unit weight, kaolin next, talc the least — and that ordering is exactly why talc-free reformulations keep running into shine. A porous silica at 200–300 oil absorption take…
No answer matches your search in this topic.
Not finding an answer?

Describe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.

Talk to our technical team
Become a Distributor