Is cosmetic-grade silica safe on skin, and what should I check in the documentation?
The material is amorphous synthetic silica, not crystalline quartz, and that distinction is the whole safety story — crystalline silica is the respirable hazard, amorphous silica is not, and cosmetic grades are specified as amorphous.
Three things belong in the paperwork: heavy metals reported per lot (typically As, Pb, Hg and Cd against the cosmetic standard), microbiological limits, and an explicit statement that the grade is amorphous. Our COA carries all three for each lot.
For a powder handled in bulk, the practical risk sits in the workplace rather than on skin. Local exhaust at the filling station does more for your operators than any change to the specification, and it is the point auditors usually ask about.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Synthetic amorphous silica is not the same substance as crystalline silica, which carries a Carc. 1A inhalation classification. Nano forms must be labelled "[nano]" under Article 19(1)(g). |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Keep the distinction between synthetic amorphous silica and crystalline silica explicit — most compliance questions on this material come from that mix-up.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.