My formula feels tight and dry after adding silica. How do I rebalance it?
Drop the oil absorption first, then the loading, then add back slip.
High-absorption silica removes part of the oil phase along with the sebum, so the film ends up under-plasticised. Moving from a 300 grade to a 200 or 150 grade at the same loading often fixes it without touching the rest of the formula. If you must keep the grade, reduce the loading and make up the oil control with a platy filler.
Slip is the second lever: a small addition of boron nitride or mica restores glide and offsets the dry, draggy feel without giving back the oil control.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Synthetic amorphous silica is not the same substance as crystalline silica, which carries a Carc. 1A inhalation classification. Nano forms must be labelled "[nano]" under Article 19(1)(g). |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Keep the distinction between synthetic amorphous silica and crystalline silica explicit — most compliance questions on this material come from that mix-up.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.