What is the practical difference between S201 and S300, and between S202 and S302?
Particle size is nearly the same; oil absorption is not. S201 is 7 µm at 200, S300 is 7 µm at 300. S202 is 5 µm at 200, S302 is 5 µm at 300.
So these pairs let you change oil absorption without changing particle size, which matters when you are tuning oil control and do not want the skin feel or the scattering behaviour to move at the same time. Going from 200 to 300 typically means more oil taken up, a drier finish, and more binder needed to keep the compact together.
If you are troubleshooting one variable at a time, stay within a pair. If you change size and oil absorption together, you will not be able to tell which one caused the result.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Synthetic amorphous silica is not the same substance as crystalline silica, which carries a Carc. 1A inhalation classification. Nano forms must be labelled "[nano]" under Article 19(1)(g). |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Keep the distinction between synthetic amorphous silica and crystalline silica explicit — most compliance questions on this material come from that mix-up.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.