You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Spherical Porous Silica

How do I choose between oil absorption 60 and 300?

By how much oil you need taken out of the formula, and how dry you can afford the finish to feel.

Low oil absorption (Kingsica S060 at 60, TR070SI at 70) suits formulas that already contain enough oil-absorbing filler and only need texture. Mid range (2028 / 3028 / 5028 / 1228 at 90–100) is the general-purpose zone for pressed and loose powder. High values (S151 at 150, S201 / S202 at 200, S300 / S302 at 300) are for oil control and for matte, and they take up a lot of binder along with the oil.

The mistake to avoid is picking the highest number available. High oil absorption also means higher binder demand and a tighter, drier feel, so the right value is the lowest one that meets your oil-control target.

Regulatory status — Silica (synthetic amorphous) INCI SILICA · CAS 7631-86-9, 112945-52-5
MarketStatusBasis and conditions
EU Permitted CosIng listed; no Annex restriction — Synthetic amorphous silica is not the same substance as crystalline silica, which carries a Carc. 1A inhalation classification. Nano forms must be labelled "[nano]" under Article 19(1)(g).
UK Permitted No Annex restriction
US Permitted No ingredient-level restriction
China Permitted IECIC
Japan Permitted General cosmetic ingredient
ASEAN Permitted ACD, no Annex entry
Korea Permitted MFDS cosmetic ingredient standard
Canada Permitted Hotlist: not listed

Swipe the table sideways for the full basis column →

Watch: None. Keep the distinction between synthetic amorphous silica and crystalline silica explicit — most compliance questions on this material come from that mix-up.

Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor