Which grades are for scrub and cleansing textures?
The PC series — PC20 (20 µm), PC100 (100 µm), PC150 (150 µm) and PC200 (200 µm), at oil absorption 100–130.
For scrubs the particle size sets the sensation: 100–200 µm reads as a clearly perceptible scrub, while 20 µm is closer to a polishing feel and is easier to keep in suspension in a surfactant base. K15 at 150 µm and oil absorption 300 is used where you want the same size with much higher oil uptake, for example in a cleansing balm.
These are the same chemistry as the cosmetic grades, so from a documentation point of view there is no separate category to qualify.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Synthetic amorphous silica is not the same substance as crystalline silica, which carries a Carc. 1A inhalation classification. Nano forms must be labelled "[nano]" under Article 19(1)(g). |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Keep the distinction between synthetic amorphous silica and crystalline silica explicit — most compliance questions on this material come from that mix-up.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.