What particle sizes are available, and how do I convert mesh to microns?
Our range runs from roughly 2 µm to 200 µm. The mesh figure some suppliers quote is a screen size, not a particle size, and the conversion is approximate: 325 mesh is about 44 µm, 800 mesh about 18 µm, 1250 mesh about 10 µm, 2500 mesh about 5 µm. So a 1000 mesh powder averages around 13 µm, not 1000 of anything.
Use mesh only to sanity-check a supplier's claim. Specify in microns, and better still ask for D50 with D10 and D90 — two powders with the same D50 can feel completely different if one has a long coarse tail.
For texture work the useful band is 5–20 µm. Above 50 µm you are in scrub territory, where the particle is meant to be felt rather than to disappear into the film.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Synthetic amorphous silica is not the same substance as crystalline silica, which carries a Carc. 1A inhalation classification. Nano forms must be labelled "[nano]" under Article 19(1)(g). |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Keep the distinction between synthetic amorphous silica and crystalline silica explicit — most compliance questions on this material come from that mix-up.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.