Oil absorption or specific surface area — which number should drive my choice?
Oil absorption is the number to formulate with; specific surface area is the number that explains it.
The two track each other closely, because more surface means more oil held on it, so a grade at 300 g/100 g oil absorption also sits at the top of the surface area range. Where they diverge is porosity: our spherical porous grades hold oil inside the sphere as well as on the outside, so they can deliver a high oil absorption at a moderate surface area.
When you are choosing, use oil absorption — that is what competes with your binder in the formula. When two grades with similar oil absorption feel different, look at surface area: the more porous one is usually the drier of the two on skin.
| Market | Status | Basis and conditions |
|---|---|---|
| EU | Permitted | CosIng listed; no Annex restriction — Synthetic amorphous silica is not the same substance as crystalline silica, which carries a Carc. 1A inhalation classification. Nano forms must be labelled "[nano]" under Article 19(1)(g). |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
Swipe the table sideways for the full basis column →
Watch: None. Keep the distinction between synthetic amorphous silica and crystalline silica explicit — most compliance questions on this material come from that mix-up.
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.