Water-based Slurry FAQ
14 answered questions on Water-based Slurry.
Water-based Slurry14 answers
001Oil-based or water-based slurry — what decides it?The continuous phase of your finished emulsion, and nothing else. Put a water-based slurry into an anhydrous base and it will not incorporate; put an oil-based one into a gel and the same thing happen…
002Why is the pigment content lower in water-based slurries?Because water has a lower viscosity at the same solids and cannot hold a dense pigment load in suspension without settling or gelling. The numbers show it: TiO2 in water reaches 60–65% (848W, 851W) be…
003What is the difference between transparent and regular iron oxide?Particle size. Transparent grades are far finer, so they absorb colour but scatter much less light — they tint without hiding. Regular iron oxide at a few hundred nanometres gives opacity and coverage…
004How do I stop the slurry from settling in storage?Accept soft settling, prevent hard caking, and mix before use. A water-based dispersion with a high pigment load will settle; what you control is whether it settles into a soft sediment or a hard cake…
005What is the graphene dispersion, and what is it used for?It is an aqueous graphene dispersion positioned as a black colourant alternative, not as an additive for conductivity or strength. The datasheet lists its use as a replacement for bamboo charcoal, car…
006What about preservation in a water-based slurry?The slurry is preserved as supplied, but the preservation margin in your finished product is yours to establish. A water-based dispersion is an aqueous system with a carbon source in it, so microbial …
007What are the eyeliner and nail polish series?They are the same dispersion technology tuned for two applications with unusual demands. The high-waterproof eyeliner series is built for films that stay on a wet lash line without smearing, so the di…
008What is the MOQ and lead time?MOQ is 5 kg for a stock grade and 25 kg for production. Lead time 7–15 working days, samples 1 kg. Shelf life is typically 12 months for water-based products, shorter than the oil-based range because …
009How do I add a water-based slurry to a cushion or a liquid foundation?Add it to the water phase before emulsification, not to the finished emulsion. The pigment needs to be fully wetted by the aqueous phase. Adding it after the emulsion is formed means it has to find it…
010The slurry separates or floats in my formula. What causes it?Two different problems look the same from the outside, and they have different fixes. Flotation is pigment migrating upward as a separate layer, usually because it has flocculated into clusters that a…
011Is a water-based slurry the same as a pigment dispersion?In practice the terms overlap and suppliers use them loosely, so the only reliable approach is to ask what is in the container. A slurry, in our sense, is pigment dispersed in a carrier with a dispers…
012How is fineness controlled, and what happens if the dispersion is too coarse?Fineness is set at the milling stage and verified on a grind gauge — a drawdown on a graduated steel block that shows the largest remaining agglomerates in microns. If a dispersion is too coarse, four…
013Can water-based slurries be used in skincare with colour?Yes, and it is a growing category, but the compliance route is different from a decorative product. A tinted moisturiser or a coloured serum is still a cosmetic, so the colourant has to be permitted f…
014What regulatory points apply to yellow, red and blue water-based slurries?The colour drives the regulation, not the carrier — and yellow, red and blue each sit in a different place. Yellows are usually iron oxide, which is widely permitted, or an organic lake, which is rest…
No answer matches your search in this topic.
Not finding an answer?
Talk to our technical teamDescribe your formulation system and the problem — the technical team replies within one business day, and can arrange samples at the same time.