What data should a powder supplier provide for a full safety assessment?
A full safety assessment asks one question: can the exposure be quantified? For a powder that means four data groups, not a certificate of analysis.
Composition first — INCI name, chemical identity, percentage of each component, and whether any fraction is nano-scale (a primary particle below 100 nm has to be declared separately). Impurities second — measured lead, arsenic, mercury and cadmium with their detection limits; talc grades add an asbestos test by polarised light microscopy or XRD; colour powders add banned azo dyes and extractable heavy metals. Toxicological evidence third — cite an existing CIR or SCCS opinion where one exists and only commission testing where none does, typically repeated-dose toxicity, Ames mutagenicity and skin irritation to start. Exposure fourth — the maximum use level in the finished product and the daily application amount, which is what the SED calculation actually needs.
In practice, ask for a support pack organised in these four groups. It is faster than mining a COA, and it forces the supplier to state the CIR opinion year, because conclusions on the same material do change between editions.
One item is routinely missed: if the grade is surface-treated, the treatment agent needs its own composition and level. It is only 1-3% of the powder, but it does enter the formula.
Based on publicly available regulatory texts as of November 2026. Regulations are subject to amendment — always confirm against the latest official publication for your market.