Does the EU microplastics restriction (2023/2055) affect cosmetic powders?
The restriction covers synthetic polymer microparticles, not powders as a category — so split the question into inorganic and organic.
Out of scope: talc, mica, kaolin, silica, boron nitride, titanium dioxide, iron oxides and synthetic fluorphlogopite are inorganic and are not synthetic polymers. Nothing in the restriction applies to them.
In scope: nylon-12, PMMA spheres, PE and PP beads, polyurethane powders, and the polymer microspheres sold for soft-focus or texture. The test is three conditions together — solid, 5 mm or smaller, and both hard to degrade and insoluble in water.
Dates are staged rather than a single cut-off: rinse-off products from October 2027, leave-on products from October 2029, with make-up, lip and nail formats following at a later date. Formulas already on the market usually get the transition window, but a new development is better designed to the post-restriction position from the start.
Two practical steps. First, check the INCI and the chemical identity of every grade — anything containing acrylate, methacrylate, nylon, polyethylene, polypropylene or polyurethane needs a separate confirmation. Second, replace with inorganics where possible: spherical porous silica for PMMA spheres, silica or mineral-origin particles for PE beads, and boron nitride to recover the slip that is lost.
A written statement from the supplier on whether a grade is a synthetic polymer is faster than reading INCI names and guessing.
Based on publicly available regulatory texts as of November 2026. Regulations are subject to amendment — always confirm against the latest official publication for your market.