How should a powder supplier support California Prop 65 labelling?
Prop 65 is a right-to-know law, not a ban list: a listed substance above its exposure threshold triggers a warning, below it does not. So the ingredient side does not need to avoid a word — it needs the exposure calculated.
The substances that come up for powders are a short list: titanium dioxide and carbon black by the inhalation route, crystalline silica by inhalation, talc where asbestos is detected, lead, arsenic, mercury and cadmium as trace impurities, and cobalt or nickel as pigment impurities. Two thresholds apply — NSRL for carcinogens, MADL for reproductive toxicity — and the calculation runs off the daily amount used in the finished product. A cosmetic powder is used in small amounts, so most cases land below the threshold, but the arithmetic has to be written down rather than assumed.
Three things the ingredient side can supply: measured trace elements with detection limits, the particle size distribution (which decides whether the inhalation route exists at all), and a statement on whether the grade contains a listed substance. The warning obligation sits with the finished-product brand, so a brand that cannot obtain these three ends up labelling everything.
One separate thread is easy to confuse with Prop 65: California legislation passed in 2024 bans talc in cosmetics from 2027. That is an outright prohibition, not a warning duty, and both have to be tracked.
Based on publicly available regulatory texts as of November 2026. Regulations are subject to amendment — always confirm against the latest official publication for your market.