You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Production & QC

My loose powder flies everywhere and does not adhere well. How do I fix it from the powder side?

Flying powder is mostly excess fines plus static, while poor adhesion is insufficient affinity between powder and skin. They often appear together but have different causes.

Start with the particle size distribution. If more than a small fraction sits below 3 μm the powder is simply too light and lifts off the brush. Moving the main body to D50 8-15 μm and trimming the sub-3 μm fraction makes an immediate difference. Also check the span of the distribution: a very wide span means both fines and coarse particles are present, so you get flying powder and grittiness at the same time.

Next, surface properties. Untreated powder has high surface energy and holds static charge, so particles repel each other and float. Silicone or silane treatment lowers surface energy so particles cluster instead of scattering. Metal soaps such as magnesium stearate are very cost-effective here, and 1-2% noticeably improves adhesion and pressed strength.

Finally, formula structure. Adding 2-4% platelet powder such as mica or boron nitride improves adherence because the platelets lie flat and form a continuous film on skin. A small amount of oil or ester acts as a binding phase and suppresses dusting, though it must not compromise the dry feel.

One overlooked factor: the sifter and mesh geometry in the pack affects dusting almost as much as the formula does.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor