You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Regulatory News

Regulatory News REACH for Cosmetic Powders: Registration & SVHC

KingPowder Technical Team 187

Ask a European buyer what they need before approving a mineral powder and the answer is usually "a REACH statement". What that statement has to contain is where most of the confusion sits, because the obligations fall on different parties depending on whether the powder is sold as a substance, as part of a mixture, or ends up inside a finished cosmetic product.

1. The exemption belongs to the cosmetic product, not to every ingredient

Regulation (EC) No 1907/2006, Article 2(6)(b), removes cosmetic products as defined by the Cosmetics Regulation from most REACH titles: registration (Title II), downstream user obligations (Title V), evaluation (Title VI) and authorisation (Title VII). The wording is built around the use, not around the substance.

That distinction matters for anyone supplying cosmetic-grade powders. Boron nitride, titanium dioxide, mica, talc and spherical silica are rarely used only in cosmetics. The same grade is frequently sold into coatings, plastics or technical applications. For those uses the cosmetic exemption does not apply and the substance has to be registered, normally by the EU manufacturer or importer who places it on the EU market.

In plain terms: a powder used exclusively in cosmetic products in the EU does not trigger registration through that use. A powder with any non-cosmetic use in the EU does trigger registration for that use. A statement that simply says "REACH exempt" without naming the use scenario is not a usable answer.

2. Who registers: almost never the Chinese manufacturer

Registration is the duty of the EU-based manufacturer or importer. A Chinese producer sells to an EU importer, and the importer becomes the registrant for the tonnage they bring in. Two consequences follow, and both are routine sources of delay:

  • The importer needs the full compositional identity: CAS and EC numbers, and for substances of unknown or variable composition the source and process information needed to build that identity.
  • If you sell through a distributor rather than directly, the registration duty can sit with a party you have never spoken to. Ask who holds the registration number and for which tonnage band before quoting.

Only Representatives are common in this trade. A non-EU manufacturer can appoint an EU-based Only Representative to register on its behalf, which lets the importer treat the substance as registered. Whether that is worth the cost depends on volume and on how many EU customers you serve.

3. The SVHC candidate list: the 0.1% threshold is the whole conversation

The candidate list of substances of very high concern is maintained by ECHA and updated roughly twice a year. It grows in two directions: new entries, and existing entries re-scoped to cover additional uses or compound groups. Two things follow for a powder buyer:

  • Threshold.The test is whether a candidate-list substance is present above 0.1% by weight in the mixture supplied. For a mineral powder this is usually a question about impurities and surface-treatment chemistry, not about the main component.
  • Documentation.Above 0.1%, the safety data sheet must disclose the substance in Section 3 and the safe-use information in the exposure sections. A blanket letter saying "contains no SVHC" is not the same thing, and an audited buyer will not accept it without the composition behind it.

Where SVHC content is genuinely close to the limit, the useful answer is the measured figure plus the analytical method and detection limit. Buyers who have been through one audit will ask for exactly that.

4. Surface treatment is where SVHC questions usually land

Untreated mineral powders are simple on paper: a defined mineral, a particle size distribution, a heavy-metal profile. Surface-treated grades are not. Silane coupling agents, stearates and silicone-based treatments add organic chemistry to the dossier, and that organic chemistry is what a candidate-list review has to cover.

For treated grades, supply the treatment agent identity and its approximate loading, not only the trade name. A trade name cannot be screened against the candidate list, and it cannot be assessed by the buyer's regulatory team either.

5. What to request from a supplier

Document What it must contain
Safety Data Sheet GHS format, all 16 sections, current revision date, matching the grade actually shipped
SVHC declaration Per-substance statement against the candidate list version cited, with the 0.1% assessment method
REACH statement Named use scenario (cosmetic only, or mixed), plus whether registration is held by an importer or an Only Representative
Identity data CAS and EC number for the main component and for each treatment agent
Heavy metals Pb, As, Hg, Cd, Sb per batch, with method and limits stated

6. The practical summary

The REACH question is rarely "is this product exempt". It is "which obligations attach to this substance in this use, and who is carrying them". A supplier who can name the use scenario, the registrant and the SVHC position in one page saves the buyer a month of correspondence, and that page is the difference between being shortlisted and being parked.

Regulatory texts are revised continuously. The above reflects the structure of the framework rather than the current status of any individual substance; confirm the candidate-list version and the applicable entries with your importer or regulatory consultant before relying on any declaration.

Become a Distributor