You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Regulatory News

Regulatory News ASEAN Cosmetic Directive: Annexes, Notification

KingPowder Technical Team 52

Cosmetic regulation across ASEAN looks uniform from the outside: one ASEAN Cosmetic Directive, one set of annexes, one notification system. Companies that have actually shipped into Indonesia, Thailand and Vietnam know the documents meet three different receptions. The difference is not in the text of the directive. It is in how each member state applies it.

1. The directive is a set of annexes, not an approval body

The ASEAN Cosmetic Directive organises ingredient control into five annexes: Annex II for prohibited substances, Annex III for restricted substances, Annex IV for permitted colourants, Annex VI for permitted preservatives and Annex VII for permitted UV filters. Member states transpose these into national law, and Vietnam is the clearest example of direct incorporation.

For a mineral powder this narrows the analysis to three points: whether a UV filter is listed in Annex VII with the required concentration and form, whether a colourant is listed in Annex IV, and whether the finished product meets heavy-metal and microbial impurity limits.

Annex II is a moving target. Member states update the prohibited list in line with international practice, usually with a transition period, for example a full prohibition eighteen months after announcement. An ingredient already in a formula deserves a re-check after each update rather than a single review at the start.

2. Notification plus a product information file, with the emphasis varying

The directive uses notification together with a Product Information File held on file, and does not require pre-market technical review. In principle a notification number allows sale, with the file retained by the company for inspection.

In practice the testing expectations at notification diverge widely:

  • Singapore and Malaysiado not require the file to be uploaded during notification; it is retained and produced on request.
  • Thailand and Vietnamdo not require test reports at notification, but may request them at customs clearance or during market surveillance.
  • Indonesia (BPOM)places weight on the certificate of analysis, and microbial and heavy-metal reports are commonly requested with the notification.
  • The Philippinesrequires reports explicitly, with microbial limits and heavy metals among the mandatory tests.

This shapes preparation strategy. A complete file plus baseline testing covers Singapore and Malaysia. Indonesia and the Philippines require the reports to exist before notification rather than being assembled at clearance.

One traceability requirement is often missed. A test report must trace to a specific batch and a specific product. Where a representative sample report is used to cover several SKUs, the equivalence of formula, process and packaging has to be demonstrated, or a justification will be requested. Reports also have a shelf life of their own: microbial data is batch-bound, while heavy-metal and physicochemical data is generally refreshed every one to two years where the formula is unchanged.

3. Regional baseline, national tightening

The ASEAN guidelines on cosmetic contaminants set a regional baseline for technically unavoidable heavy-metal impurities: mercury 1 ppm, lead 20 ppm, arsenic 5 ppm, cadmium 5 ppm, and dioxane 10 ppm. On microbiology, products for children under three, eye products and products contacting mucous membranes are held to 500 CFU/g total aerobic count, other cosmetics to 1000 CFU/g, with Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans absent in the specified sample quantity.

The baseline is a floor, not a ceiling. Member states may apply stricter values, and documented differences exist: Thailand applies 3 ppm for cadmium against the regional 5 ppm, and Indonesia's BPOM contaminant requirements state lead at or below 20 ppm, arsenic at or below 5 ppm and mercury at or below 1 ppm.

Cadmium deserves particular attention for mineral powders. Talc, kaolin and mica carry a cadmium background that moves with the ore source, and the gap between 5 ppm and 3 ppm is wide enough to decide whether a lot can enter Thailand. That is a sourcing question rather than a documentation question, and it is settled at the mine rather than at the desk.

Two categories should also be kept apart. The regional baseline governs unintentionally introduced impurities. Finished-product standards govern the compliance floor of the product itself. Writing an impurity limit into a specification sheet as though it were a product specification creates a new set of questions during a customer audit.

4. UV filters and nano form: a layer beyond Annex VII

Titanium dioxide and zinc oxide are permitted UV filters in ASEAN and may be used in sun care products, subject to the concentration and form requirements of Annex VII. Indonesia adds a further layer: UVA protection, broad-spectrum performance, SPF and water resistance require supporting test data and cannot be derived from the formula. Labels carry the SPF value, the PA grade or a broad-spectrum mark, and absolute wording such as complete blocking of UV is not accepted.

Nano form is a second focus. Indonesia has been tightening review of nanomaterials, and a UV filter in nano form requires explanation and conformity with the applicable requirements. Review of children's sun care, spray formats and naturally derived ingredients has also been moving in a stricter direction.

The practical consequence for a powder supplier is that one ultrafine titanium dioxide sold to a colour cosmetics customer and to a sun care customer does not require the same documents. The first case turns on the colourant list and impurities. The second adds UV filter listing, nano form explanation and efficacy test support.

5. Indonesia: the certificate of analysis carries the file

BPOM handles pre-market notification, market surveillance and safety assessment. Its distinguishing feature is the weight given to the certificate of analysis. Imported products are commonly asked for a CoA at notification, with microbial and heavy-metal content as the focus. Testing typically uses atomic absorption spectrometry, inductively coupled plasma mass spectrometry or inductively coupled plasma optical emission spectrometry, with microwave or acid digestion as preparation.

Several details on the certificate affect acceptance directly. The test method should name its standard, limits of detection and quantification should be traceable, and the specification limits should correspond to BPOM requirements. A third-party report written only against Chinese GB methods may prompt a request for ISO method data, which is a question of method comparability rather than an objection to the result.

Imported products also require an Indonesian responsible party to carry compliance responsibility. Labels are in Indonesian and include the ingredient list, directions, warnings, batch number, expiry date and the BPOM notification number. Changes to formula, concentration or supplier require an assessment of whether re-notification or supplementary data is needed. Efficacy wording on e-commerce pages is expected to match the notified file, and this is checked in practice.

6. Thailand and Vietnam: the real checkpoint is clearance

Both markets are lighter at notification, where test reports are not uploaded as a rule, and both apply their scrutiny at clearance and during market surveillance. The recurring misjudgement is to read a notification number as permission to ship without documents in hand.

Vietnam incorporates the ACD annexes directly, so the prohibited list, restricted list, colourants, preservatives and UV filters all follow ASEAN. Labels are in Vietnamese, and products requiring special storage conditions must state them on the label or in the leaflet, with a leaflet permitted where package space is limited. Prohibited-list updates normally carry a transition period, and formulas are expected to follow.

Thailand's distinguishing points are the 3 ppm cadmium limit and, for sun care, additional SPF and UVA test requirements. Critical wavelength or PPD data is requested in some cases.

7. A preparation list for export customers

One set of test data that covers the strictest member state. Preparing to Thailand's 3 ppm cadmium and ASEAN's 20 ppm lead produces a report usable across most of the region, which costs less than repeating the work country by country.

Batch-traceable certificates carrying six items: product name, batch number, production date, test method, result and specification limit. Representative-sample reports covering several SKUs should be avoided where traceability cannot be shown.

Method alignment. ASEAN and the EU work largely on ISO methods, while Chinese data commonly uses GB methods. For Indonesia and the Philippines, a set of ISO method data obtained in advance removes a round of retesting.

Form documentation. Sun care products need nano form information; products not intended for sun care should state clearly that no UV claim is made, so the UV filter requirements are not applied.

The ingredient section of the product information file should stand on its own. Under the ACD model the file is held by the notification holder, but the ingredient safety information comes from the supplier, and a clean version means a customer changing notification country does not need to come back for it.

This article describes the ASEAN directive and the documented differences in how major member states apply it. It does not confirm market access for any specific product. National limits, annex versions and notification requirements are updated continuously and should be checked against the current texts of the target authorities, and confirmed with the local notification holder or a regulatory adviser before use in a notification.

Become a Distributor