You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Regulatory News

Regulatory News South Korea MFDS: Mineral Powder Lead Limits

KingPowder Technical Team 54

Korea is often approached as a lighter version of Japan. It is not. The two markets run on different logic. Korea publishes no positive list of permitted cosmetic ingredients; it defines banned and restricted schedules and leaves the safety assessment to the responsible party. For an ingredient supplier this shifts the burden of proof. The question is no longer whether a substance appears on a permitted list, but whether it sits inside a restriction and whether its impurities are under control.

1. Two schedules define the boundary

The framework rests on the Cosmetics Act and the Regulations on Cosmetic Safety Standards, administered by the Ministry of Food and Drug Safety (MFDS). Three schedules matter:

  • Banned ingredients, Schedule 1.Heavy metals, hormones, carcinogenic colourants and other high-risk substances.
  • Restricted ingredients, Schedule 2.Permitted only within stated concentration limits, application sites and conditions. Preservatives, UV filters and hair dyes may be used only if listed here; substances outside the list may not be used at all.
  • Colourantsfollow a separate positive list under the Standards for Cosmetic Colourants, and each colourant must also meet its individual quality standard.

For a mineral powder the practical consequence is narrow but real. The bulk substance rarely raises a banned-ingredient question. Exposure sits in the restricted schedules and in impurity control. Titanium dioxide and zinc oxide used for sun protection are administered as UV filters and must fall within the permitted list with the stated concentration and form. Talc, mica and kaolin are judged mainly on impurity data.

2. Heavy metals: powder products get their own lead tier

On 18 March 2026, MFDS issued amendment notice 2026-16 to the Regulations on Cosmetic Safety Standards, restating the limits for unintentionally introduced residues. The point that matters most for this product category is that lead is tiered by product type:

  • Lead: general products at or below 20 µg/g; earth and clay type powder products at or below 50 µg/g
  • Nickel: eye products at or below 35 µg/g; make-up other than eye at or below 30 µg/g; other products at or below 10 µg/g
  • Arsenic at or below 10 µg/g; mercury at or below 1 µg/g; antimony at or below 10 µg/g; cadmium at or below 5 µg/g
  • Dioxane at or below 100 µg/g
  • Methanol: general products at or below 0.2% v/v; wipes at or below 0.002% v/v
  • Formaldehyde: general products at or below 2000 µg/g; wipes at or below 20 µg/g
  • Phthalates, DBP and BBP and DEHP combined, at or below 100 µg/g

The separate 50 µg/g tier for earth and clay powders acknowledges that mined minerals carry a natural lead background and cannot be held to the general limit without distinction. It is not a relaxation. It converts knowing your own background into a requirement, because the higher number is of no use to a supplier who cannot show measured values. For talc, kaolin and mica, batch-level lead data becomes a baseline document rather than an optional extra.

Microbial limits run as follows: products for infants and eye products at or below 500 CFU/g total aerobic count; wipes at or below 100 CFU/g each for bacteria and fungi; other products at or below 1000 CFU/g. Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus must be absent. For net content, the average of three samples must reach at least 97% of the declared quantity.

3. Nano form has to be declared on the label

Korea requires separate notification for nanomaterials and labelling with the term (nano) in the full ingredient list. The same titanium dioxide therefore occupies two different positions in notification and labelling depending on its particle size.

The friction point is that nano status is not settled by a single D50 figure. A supplier may treat a product as non-nano on the basis of its median particle size while the regulator is looking at whether nanoscale primary particles are present. For fumed silica, ultrafine zinc oxide and nano-grade titanium dioxide, technical documentation should give both the primary particle size distribution and the agglomerate size. Providing only a D50 tends to generate a long exchange.

Sun protection carries a second layer. Titanium dioxide and zinc oxide are administered as UV filters, and both concentration and form must satisfy the permitted list. Where a product carries an SPF or PA claim, it may be handled as a functional cosmetic even if those ingredients serve only as colourants in the formula.

4. Claims determine the route, not the formula

Korea separates general cosmetics from functional cosmetics. The functional category covers whitening, anti-wrinkle, sun protection, hair dyeing, hair removal, hair loss improvement and, added in 2025, improvement of red streaks caused by stretch marks.

The governing principle is stated as a single rule: where a functional claim appears on the label or in advertising, the product is managed as a functional cosmetic regardless of the actual ingredients. Base make-up carrying an SPF or PA designation is included. The effect on formulation work is direct. A titanium dioxide included only as a colourant moves the whole product onto the functional review path once the product claims sun protection.

General cosmetics require customs clearance filing before import, usually measured in weeks. Functional cosmetics require prior MFDS review, usually measured in months. Where a product uses only ingredients already reviewed and listed in Appendix 4 of the Standards for Functional Cosmetics, within the stated concentration and use scope, part of the safety data may be omitted and the process shortens. Some categories may use a reporting route in place of review.

An ingredient introduced to Korea for the first time requires a separate safety review with specification data and safety data before it may be used.

5. The responsible party sits in Korea

Every imported cosmetic requires a Responsible Cosmetics Distributor in Korea, which carries final legal liability for safety, quality, labelling and advertising. The entity registers with the local food and drug administration and must employ a full-time Responsible Sales Manager with a pharmacy, chemical or biological qualification or certified experience; the role cannot be combined with another. A quality agreement with the overseas manufacturing site is expected.

For a Chinese supplier this layer is normally handled by the Korean customer or its agent. One obligation does reach back to the supplier. The responsible distributor must report the ingredient list used in manufacture to MFDS before the product is distributed, and for imported products the report runs through the Korea Pharmaceutical and Bio-Pharma Manufacturers Association. Ingredient information therefore has to be precise enough to enter the notification system directly, and inconsistent naming stops the process at that point.

Labelling requires Korean ICID standard names. Direct translation from Chinese is not accepted, and mixing with English INCI terms is not accepted either. Ingredients are listed in descending order of concentration, with ingredients below 1% in any order. Type size is generally at least 7pt. Medical wording is restricted: terms implying treatment, repair or regeneration of a condition, and any wording presenting the product as acting pharmacologically or against micro-organisms, are not accepted. Fragrance allergens must be named individually above the thresholds of 0.001% for leave-on and 0.01% for rinse-off products.

6. Four changes across 2025 and 2026

Mandatory safety assessment.The Cosmetics Act was amended in July 2025 to require the responsible distributor to have a qualified assessor review the formula, ingredient toxicology and packaging before launch, with a report retained on file. Pilot programmes are planned for 2026 and 2027, phased implementation from 2028 by company size and product type, and full application in 2031. The effect on suppliers is a shift in what customers request: fuller toxicology and exposure data rather than a certificate of analysis alone.

Official organic certification withdrawn.Effective August 2025, MFDS no longer certifies natural and organic cosmetics, moving to market-based certification with post-market checks. The burden of substantiating natural and organic claims returns to the company making them.

Overseas direct purchase tightened.Effective April 2026, MFDS publishes information on cross-border products found to contain prohibited substances or to present health concerns, and operates an inspection mechanism for this channel.

Customised and children's products defined further.Customised cosmetics now require mixing and decanting areas to be separated from other areas, allow temporary sale outside the notified site for up to one month, and add an examination for dispensing managers. Children's products set ages at under three for infants and four to thirteen for children, with safety data prepared and retained before launch.

7. What to have ready before quoting

Metal background data by source and batch, covering lead, arsenic, cadmium, mercury and nickel, with lead values that can be read against the 50 µg/g tier. Particle size reported in two ways, primary distribution and agglomerate size, to avoid repeated discussion of nano status. Confirmation of the Korean naming convention with the customer, since ICID standard names and INCI names do not always correspond literally. And the full chemical identity of every surface treatment, which enters both the ingredient report and the safety assessment, where a vague name becomes a rejection.

This article describes the current Korean framework and published amendments. It does not confirm market access for any specific product. Limits, schedule versions and review routes should be checked against the current MFDS notices and confirmed with the Korean responsible distributor or a regulatory adviser before use in a notification.

Become a Distributor