You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Talc

Comply With BVL Heavy Metal Requirements

BVL heavy-metal compliant grade talc, 2 grades, mean particle size 5–8 µm, specific surface area 6–8, oil absorption 66–81. Platelet talc improves spreading and pressability; heavy-metal limits are checked against BVL requirements. Common in pressed powders, eyeshadows and blushers.

Product NameProduct Code Mean Particle Specific Surface Area
Oil Absorption
Kingtalfer LS-60051061765 µm881
Kingtalfer LS-60081061778 µm666

Wet-stripped talc of high purity and silky texture for loose powder, setting powder, pressed powder and oil-control color cosmetics.

Need a sample or technical data for Comply With BVL Heavy Metal Requirements?

Request sample

Talc — frequently asked questions

The 13 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Talc” answers (13) →

Recommended 01 / 13

What is the BVL series, and do I need it?

It is the same talc held to the German BVL heavy-metal limits, which are stricter than the general c…

Read the full answer
Recommended 02 / 13

Is your talc asbestos-free, and how is that documented?

Yes. Every lot is tested for asbestos and the result is reported on the COA, which is the document a…

Read the full answer
Recommended 03 / 13

Your grades run from 5 to 16 µm with oil absorption from 40 to 81. How do I choose?

Choose by oil absorption first, particle size second — the two move together but not perfectly, and …

Read the full answer
04 / 13

LS-2500 and LS-6008 are both listed at 8 µm but with different oil absorption. Which number do I trust?

The oil absorption figure — the size is a nominal mean, and the two grades are produced on different lines.

Read the full answer
05 / 13

What are the current regulatory pressures on talc, and how should I plan?

The direction is toward tighter documentation and, in some markets, restricted use in specific product types.

Read the full answer
06 / 13

What loading do you see in loose powder versus pressed powder?

Loose powder 40–70%, pressed powder 25–45%.

Read the full answer
07 / 13

How do I keep talc from flying during filling?

Reduce the fine fraction and control humidity, in that order.

Read the full answer
08 / 13

Can I replace talc completely?

In most formulas, yes, but it takes more than one material.

Read the full answer
09 / 13

Does particle size affect adhesion and wear?

It affects them through the oil absorption path more than directly.

Read the full answer
10 / 13

What is the MOQ, and can you ship in a specific packaging?

MOQ is 25 kg for a stock grade, 100–200 kg for a non-stock grade.

Read the full answer
11 / 13

If I cut the talc in a loose powder by half, what has to change to keep the same feel?

Four things, and skipping any one of them is why talc reduction usually fails on the first trial.

Read the full answer
12 / 13

Can talc be used in eye products, and what are the limits?

It is permitted in eye products in most markets, and traditionally pressed eyeshadow was built on it.

Read the full answer
13 / 13

Does talc cake up once it absorbs oil?

Talc absorbs comparatively little oil and absorbs it slowly, so it is one of the less caking materia…

Read the full answer

Not the question you had? Talk to our technical team, or browse the knowledge base.

Related questions

These come from other powder families that often appear alongside this product in the same formula.

  • Can mica and talc be substituted for each other?

    Not on an equal-weight basis. Their functional profiles differ: mica is platy and provides lustre and adhesion, while talc is platy but softer, providing slip and oil absorption with weaker coverage.

    Replacing talc with mica reduces slip and increases lustre, often making the formula look sparkly. Replacing mica with talc flattens the finish noticeably.

    Also note that talc carries higher regulatory sensitivity because of the asbestos risk. Cosmetic-grade talc must be confirmed asbestos-free, which is one reason many export formulas proactively reduce talc levels. When replacing talc with mica, determine the approximate ratio experimentally, then fine-tune against the skin feel and lustre you need.

  • Which powders give a natural soft-focus effect?

    Soft focus means scattering light at the skin surface instead of reflecting it directly. At the powder level that requires two things: a particle size distribution close to the wavelength scale, and shapes that create many small diffuse reflecting facets.

    The most reliable combination is spherical porous silica with hexagonal boron nitride. The silica provides diffuse scattering through its pore structure and absorbs excess sebum, cutting the specular shine that makes texture obvious; boron nitride platelets sit in skin creases and provide a satin rather than flat-matte finish.

    Typical use levels are 2-5% spherical silica and 3-8% boron nitride.

Become a Distributor